# HVAC Pricing Guide (2026): Installs by the Job, Service at Flat Rate

- **Canonical URL:** https://iluratechnology.com/keel/hvac-pricing-guide/
- **Jurisdiction / Region:** US / Global
- **Last Verified:** Tue Oct 06
- **Keel Official Pricing (v5.3.8):** Free to download on the App Store (daily tracking included; optional 5-Folder Pack $49.99 per period, or Keel Lifetime $299.99 paid once — no monthly subscription)
- **Summary:** HVAC pricing guide for 2026: why per-ton quotes fail, one 3-ton changeout priced in two houses ($7,589 vs $12,570), and how to build a flat-rate price book.

---
# HVAC Pricing Guide (2026): Installs by the Job, Service at Flat Rate

**Short answer:** Hvac pricing guide: Price HVAC work from cost, not from tonnage: equipment at distributor cost, installed material, technician hours at your loaded rate and any subcontracts, divided by one minus your margin, with permits passed through — and the same 3-ton changeout in the worked example below quotes $7,589 in one house and $12,570 in the next. The ton, 12,000 BTU/h of cooling capacity, only sizes the equipment, and a Manual J load calculation picks it, not floor area.

> **⚡ Instant Estimates and Quotes to Invoice Toolkit (`🔗 Embed / CSV Template` + `100% Free Unlimited App`):** Open the **[Free Invoice, Quote & Estimate Maker](/keel/invoice-generator/)** (or click **`🔗 Embed / CSV Template`**), email **mert@usekeelapp.com** for **Free `.keel` Data Setup**, explore the **[Estimates and Quotes to Invoice App Store Edition](/keel/cpp/estimates-quotes-to-invoice/)**, or **[Download Keel Free on the App Store (`$0/mo` Core Plan)](https://apps.apple.com/us/app/keel-estimating-invoicing/id6786659713?ppid=a1503ff4-5e37-4400-b791-e25e87080cbf)** to manage estimates, invoices, job-site receipts, and mileage offline on iPhone.

SEER2 changes the cabinet, the coil, and sometimes the plenum above it, and everything else is measured in linear feet of lineset and duct, in circuits, and in permits. Service work is priced differently: a dispatch fee, then a flat rate per named repair from a price book.

Tonnage is the number everyone in this trade quotes and the number that explains the least. It describes the box you bought, and the box is rarely the part that decides whether the job made money. This page takes the unit apart: what a ton measures, what SEER2 drags along with it, which line items ignore tonnage entirely, and what the identical 3-ton changeout costs in two different houses. The paperwork that has to hold up after the system runs is covered in [what to include on an invoice](/keel/what-to-include-on-an-invoice/).

## What does a ton actually measure?

Twelve thousand BTU per hour of heat removal, a figure inherited from the cooling effect of melting a ton of ice in a day. Residential equipment comes in half-ton steps — 1.5, 2, 2.5, 3, 3.5, 4, and 5 tons, or 18,000 to 60,000 BTU/h.

The important part is that nominal tonnage is a bin, not a promise. A unit sold as 3 tons is commonly rated somewhere in the mid-thirty-thousands of BTU/h at standard rating conditions, and its real output changes with outdoor temperature, indoor coil match, airflow, and charge. Two 3-ton systems from different manufacturers are not the same machine, and the AHRI certificate for the specific outdoor and indoor combination is what tells you what you actually sold.

## Why doesn't square footage pick the tonnage?

Because floor area does not determine load. Orientation, glazing area and type, insulation, infiltration, ceiling height, duct location, occupancy, and local design temperatures all move it, and a Manual J calculation is what turns those into a number. Two houses of identical size can land a full ton apart.

Guessing high is not the conservative error. Oversized equipment satisfies the thermostat before it pulls humidity out of the air, short-cycles, wears its compressor, and produces a clammy house and a complaint you will drive back to for free. Undersized equipment runs continuously on the design day and still loses ground. Either mistake means you bought the wrong box, priced from it, and now own the outcome. Manual S is the step that converts the calculated load into a specific model at specific conditions.

## What does SEER2 change besides the sticker?

More than efficiency. SEER2 is measured under a test procedure that loads the blower against higher external static pressure than the old SEER test did, which is closer to how equipment actually lives in a real duct system. Higher-rated equipment usually means larger coil face area, taller indoor cabinets, and bigger outdoor units, and every one of those becomes an installation cost.

| What rises with SEER2 | What it does to the install |
|---|---|
| Indoor coil cabinet height | Existing plenum may not fit; a transition gets fabricated on site |
| Outdoor unit footprint and weight | Pad size, clearances to the wall and fence, sometimes a new location |
| Sensitivity to duct static | Undersized returns that "worked" become a callback on the new system |
| Match specificity | Only the certified indoor and outdoor combination earns the rating |
| Price of the box itself | The largest single line on the ticket moves first |

Efficiency minimums are also regional. Split-system air conditioners installed on or after January 1, 2023 must meet 13.4 SEER2 in the North and 14.3 SEER2 in the Southeast and Southwest, and in the regional-standard states compliance is measured at installation rather than at manufacture, as the Department of Energy explains in its [regional standards enforcement](https://www.energy.gov/gc/legal-resources/office-assistant-general-counsel-enforcement/regional-standards-enforcement) material. The contractor who installs a non-compliant unit is the one exposed, which makes this a pricing question as well as a compliance one: cheap equipment that cannot legally go on the pad is not cheap.

## What is inside a "per ton installed" number, and what is not?

Per-ton pricing is shorthand for the equipment plus a typical install in a typical house. It falls apart the moment the house is not typical.

| Usually inside a per-ton figure | Usually outside it |
|---|---|
| Matched condenser and indoor coil or air handler | Lineset beyond a nominal length |
| Standard refrigerant charge and evacuation | Any duct modification, return upsizing, or plenum fabrication |
| Reconnection to an existing, adequate circuit | New circuit, panel work, or a subpanel |
| A basic programmable thermostat | Communicating or zoned controls, and the wiring they need |
| Removal of the old equipment | Crane, attic hoisting, or crawlspace access allowances |
| Startup and charge verification | Airflow correction after static readings come back high |
| Standard pad and isolation | Permit and third-party inspection fees |

## Which items don't scale with tonnage at all?

Most of the ones that ruin a bid. These are measured in linear feet, in counts, or in access difficulty, and a 2-ton job in a hard house can carry more of them than a 5-ton job in an easy one.

| Item | Unit | What drives it |
|---|---|---|
| Refrigerant lineset | Linear foot | Distance from the condenser to the coil, plus the route, plus vertical lift |
| Line hide and chase work | Linear foot | Exposed exterior runs the homeowner will look at every day |
| Duct trunk and branch | Linear foot, or per supply register | Layout, existing sizes, whether returns are adequate |
| Plenum and transition metal | Per fabricated piece | The gap between the old opening and the new cabinet |
| Electrical | Per circuit, plus the disconnect and whip | Panel capacity and distance to the unit |
| Condensate | Per pump, pan, float switch, and foot of PVC | Whether gravity drain is available |
| Permit and inspection | Per job | Jurisdiction, and whether a third party inspects |
| Old equipment removal | Per unit | Recovery, hauling, and the recycler's fee |
| Commissioning | Per hour | Static pressure, charge, and airflow after everything is connected |

## What does the same 3-ton system cost in two houses?

Identical equipment on both jobs: a 3-ton condenser with a matched coil on an existing gas furnace, same brand, same efficiency, same thermostat.

| Variable | House A | House B |
|---|---|---|
| Stories and equipment location | One story, furnace in a main-floor closet | Two stories, furnace and coil in the attic |
| Condenser distance | 12 ft, straight run | 46 ft, routed through an interior chase |
| Existing plenum | New coil cabinet fits | Too short — transition fabricated on site |
| Electrical | Existing disconnect and whip serviceable | Panel full; licensed electrician adds a circuit |
| Returns | Adequate, static within range | Undersized, one return upsized before startup |
| Condensate | Gravity drain available | Pump, secondary pan, and float switch required |
| Access | Ground level, driveway to the pad | 22-inch attic scuttle and a 40 ft crawl |
| Permit | Permit only | Permit plus third-party inspection |

Now what those differences cost.

| Line | House A | House B |
|---|---|---|
| Equipment at distributor cost | $3,690 | $3,690 |
| Installed material | $464 | $1,743 |
| Subcontracted electrical | none | $680 |
| Technician hours | 13.5 | 29.5 |
| Labor at $92 loaded per hour | $1,242 | $2,714 |
| **Cost** | **$5,396** | **$8,827** |
| Price at 28% margin | $7,494 | $12,260 |
| Permit and inspection at cost | $95 | $310 |
| **Quoted** | **$7,589** | **$12,570** |
| Effective price per ton, before the pass-through permit | $2,498 | $4,087 |

The equipment line is identical on both jobs. Everything that separates them — 24 extra feet of lineset, fabricated metal, a circuit, a return, a condensate pump, sixteen more technician hours, and an inspection — is invisible to a per-ton rate. That is the whole argument against quoting one.

On the margin question, note that a 28 percent markup on that $3,690 equipment package returns $4,723 and collects only a 21.9 percent margin, while a 28 percent margin returns $5,125. The gap is $402 on one changeout, because markup multiplies cost and margin divides by one minus the rate. On the largest material line in residential contracting, that difference compounds fast.

## Where does the ton stop being the unit entirely?

On a good share of the work in an HVAC book, tonnage is not the measure at all.

| When the job is | The unit that actually prices it |
|---|---|
| A ductless retrofit | Indoor head count, with the outdoor unit sized on combined and simultaneous load |
| Duct replacement or extension | Trunk and branch linear feet, or delivered CFM per register |
| A repair call | A dispatch fee, then a flat rate per named task |
| Filtration, UV, or humidification add-ons | Per device, gated by cabinet space and available power |
| Airflow diagnosis | Hourly against a written cap, because nothing is known before the manometer goes on |

Mixing these up is expensive in a specific direction: service work priced like a small install loses the drive time, and duct work priced by tonnage loses the attic.

## How do you build a flat-rate HVAC price book?

Price each named repair once — its average task time at your loaded labor rate, plus the part — divide by one minus your service margin, and charge that figure every time, however long the particular call runs. The customer approves a price rather than an open clock, and the fast technician earns the difference instead of giving it away.

Task time means the honest average for the repair including setup, testing, and cleanup, not your best day. Using the same $92 loaded hour as the install example and an illustrative 50 percent service margin, which has to carry the drive time and unbilled diagnosis an install day does not:

| Repair | Task hours | Labor at $92 | Part cost | Total cost | Flat rate at 50% margin |
|---|---|---|---|---|---|
| Run capacitor replaced and tested | 0.5 | $46.00 | $14.00 | $60.00 | $120 |
| Contactor replaced | 0.75 | $69.00 | $22.00 | $91.00 | $182 |
| Condensate line cleared, flushed, float switch tested | 0.75 | $69.00 | $4.00 | $73.00 | $146 |
| Blower motor replaced, direct drive | 2.0 | $184.00 | $210.00 | $394.00 | $788 |

The dispatch or diagnostic fee sits in front of these lines and pays for the drive and the diagnosis; whether it is credited against an approved repair is a policy, stated before the van leaves. Re-run the book at least once a season against distributor price changes and the hours your technicians actually logged, because a flat rate built on last year's part cost is a discount nobody approved.

## Why should the per-ton number never leave your office?

Because a homeowner who hears one will compare it against a bid that measured a different house. Internally it is a useful check — reverse a finished quote into dollars per ton and set it beside your last five changeouts of similar difficulty. A number well under your own history means you missed the lineset run, the panel, or the plenum.

Published price ranges for a system replacement differ by more than a factor of two between metros and shift with equipment availability, refrigerant transitions, permit regimes, and how deep into cooling season you are. Use them to catch an order-of-magnitude error and nothing else. Your distributor pricing, your labor market, your drive times, and your overhead decide the answer. Getting that number collected on schedule is a separate discipline, and [how to get clients to pay](/keel/how-to-get-clients-to-pay/) covers it.

## What has to be recorded on every install?

Five things: the Manual J result, the model and serial numbers of both halves of the system, actual technician hours, actual distributor cost including the parts swapped from van stock, and the commissioning readings — static pressure, subcooling or superheat, and delivered temperature split. The first four rebuild next year's rates. The last one settles a comfort complaint in August without a free trip.

[Keel](https://apps.apple.com/app/apple-store/id6786659713?pt=127772795&ct=blog_esnaf_hvac-pricing-guide&mt=8) handles that record, even in an attic. It is an iOS app with no bank connection. Distributor tickets, the electrician's invoice, and the permit receipt get photographed at the counter and kept under the job, so the $3,690 of equipment on a changeout is filed against the job instead of curling in a door pocket. The invoice goes out from the driveway the day the system runs, carrying the serial numbers typed into the description where they will still be findable in year eight, and a payment link the homeowner scans as a QR code. Distributor and permit-counter runs are logged trips, handled the way [how to track mileage for taxes](/keel/how-to-track-mileage-for-taxes/) describes. Free to download on the App Store.

## Frequently asked questions

**How many BTU is a ton of air conditioning?**

Twelve thousand BTU per hour. Residential equipment is sold in half-ton steps from 1.5 to 5 tons, or 18,000 to 60,000 BTU/h. Nominal tonnage is a category rather than an exact output: a unit labeled 3 tons is rated near but not exactly 36,000 BTU/h, and its real capacity varies with outdoor temperature, coil match, airflow, and charge.

**How do I size an HVAC system correctly?**

With a Manual J load calculation, which accounts for orientation, glazing, insulation, infiltration, ceiling height, duct location, occupancy, and local design temperatures. Then use Manual S to select a specific model that meets that load at those conditions. Rules of thumb based on square feet per ton routinely miss by a half ton or more in either direction, and both directions cost you.

**What does SEER2 mean for pricing a job?**

SEER2 is rated under a test that loads the blower against higher external static pressure, closer to real duct conditions. Higher-rated equipment tends to be physically larger, so plenum transitions, clearances, and pad work can all change. Only the certified indoor and outdoor combination earns the rating, and regional minimums apply at installation in the Southeast and Southwest.

**Should I quote HVAC by the ton?**

Use it internally as a check, not as a quote. Tonnage prices the equipment and ignores lineset length, duct condition, returns, electrical capacity, condensate routing, attic or crawl access, permits, and inspections — which is where two identical systems separate by thousands. Build the number from hours, material, and equipment, then divide by tons afterward to sanity-check it.

**Why do two HVAC quotes on the same house differ so much?**

Usually scope rather than equipment. One quote may include a new circuit, fabricated plenum transition, upsized return, condensate pump, permit, and inspection while another assumes everything existing is reusable. Efficiency tier and warranty terms move it further. Compare the line items and the specific model numbers, since the AHRI-matched combination is what determines both performance and price.

**Can you give an example of flat-rate HVAC pricing?**

A run capacitor replacement that averages half an hour is $46 of labor at a $92 loaded hour, plus a $14 part, for $60 of cost. At a 50 percent service margin the flat rate is $120, charged whether the job takes 20 minutes or 45. The diagnostic or dispatch fee is separate and is quoted before the visit.

What is the $5,000 rule for AC? It is a homeowner rule of thumb for repair-or-replace decisions: multiply the system's age in years by the repair quote, and if the result is over $5,000, replacement usually makes more sense. A 12-year-old unit with a $450 repair scores $5,400, so the rule leans toward replacing. It ignores efficiency, refrigerant type, and the condition of the rest of the system, so treat it as a conversation starter with a customer, not a pricing method.

Is a new HVAC system tax deductible in 2026? For a homeowner's own residence, a new system is a personal expense and generally not deductible. The federal energy efficient home improvement credit that covered qualifying heat pumps and central air conditioners was ended for property placed in service after December 31, 2025, so check the IRS [energy efficient home improvement credit](https://www.irs.gov/credits-deductions/energy-efficient-home-improvement-credit) page and local utility rebates before promising a customer anything. On a rental or business property, the cost is generally recovered through depreciation, and commercial owners may have faster write-off options that a tax professional can confirm.

How long does a system changeout take? A straightforward one-story cooling changeout with good access commonly runs a single day for two technicians. Attic equipment, long linesets, panel work, duct modification, or an inspection wait can double the technician hours without changing the equipment at all. Price the hours you expect for that specific house, then record what it actually took so the next estimate is built on evidence.

---

*This article is general information, not professional or tax advice.*
